MYJG-150W 110V CO2 Laser Power Supply for Laser Engraver Cutting Machine USA

Description

Document
Product Description
Features & Details
【
HIGH EFFICIENCY
】-
This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response.
【
SIMPLE PORT CONTROL
】-
Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside.
【
LASER POWER ADJUSTMENT
】-
The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.
【
OPEN CIRCUIT PROTECTION
】-
The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube.
【
FACTORY AGING TEST
】-
Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds.
Key Features
High Performance
Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.
Easy Control
The laser power supply machine starts and stop can be easily controlled by the TTL level.
Simple Laser Power Control
Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.
Mark Clearly
Each data is marked for your convenience.
Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the  "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.
Protection Function
Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser;
It can better protect the laser power and prolong the service life.
Good Compatibility
Co2 laser engraver power supply is s
uitable for a variety of CO2 laser tubes
.
Laser Power Supply
The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube.
High Efficiency
Simple Port Control:
Laser Power Adjustment
Open Circuit Protection
Specification:
Power: 150W
Input Voltage: AC220V
Maximum Output Voltage: 34KV
Maximum Output Current: 38mA
Efficiency: 91%
Response Speed: ≤1ms
Cooling Method: Fan Cooling
Gross Weight:4.9kg/10.80lbs
Package Size: 39x20x14cm/15.35x7.87x5.51inch
Package Content:
1 x High Voltage Connector
1 x Laser Power Supply (150W)
MYJG40W
MYJG50W
MYJG60W
MYJG80W
MYJG100W
MYJG130W
Input voltage
AC110V
AC110V
AC110V
AC110V
AC110V
AC110V
Output voltage
DC23KV
DC22KV
DC24KV
DC26KV
DC28KV
DC50KV
Max output current
20mA
22mA
25mA
28mA
30mA
35mA
Response speed
≤1mS
≤1mS
≤1mS
≤1mS
≤1mS
≤1mS
Size
165mm*142mm*78mm
165mm*142mm*78mm
197mm*161mm*91mm
197mm*161mm*91mm
230mm*161mm*96mm
305mm*161mm*96mm
Cooling mode
Fan Cooling
Fan Cooling
Fan Cooling
Fan Cooling
Fan Cooling
Fan Cooling
Efficiency
90.00%
91.00%
91.00%
91.00%
91.00%
91.00%
SHIPPING
ABOUT US
PAYMENT
RETURNS
CONTACT
WARRANTY
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
California Warehouse: City of Industry, CA
Texas
Warehouse
:  Houston, TX
Kentucky
Warehouse
: Hebron, KY
New Jersey
Warehouse
: Perth Amboy, NJ
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
Laser Power Supply
The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube.
High Efficiency
Simple Port Control:
Laser Power Adjustment
Open Circuit Protection
Key Features
High Performance
Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.
Easy Control
The laser power supply machine starts and stop can be easily controlled by the TTL level.
Simple Laser Power Control
Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.
Mark Clearly
Each data is marked for your convenience.
Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the  "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.
Protection Function
Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser;
It can better protect the laser power and prolong the service life.
Good Compatibility
Co2 laser engraver power supply is s
uitable for a variety of CO2 laser tubes
.
Specification:
Power: 150W
Input Voltage: AC220V
Maximum Output Voltage: 34KV
Maximum Output Current: 38mA
Efficiency: 91%
Response Speed: ≤1ms
Cooling Method: Fan Cooling
Gross Weight:4.9kg/10.80lbs
Package Size: 39x20x14cm/15.35x7.87x5.51inch
Package Content:
1 x High Voltage Connector
1 x Laser Power Supply (150W)
MYJG40W
MYJG50W
MYJG60W
MYJG80W
MYJG100W
MYJG130W
Input voltage
AC110V
AC110V
AC110V
AC110V
AC110V
AC110V
Output voltage
DC23KV
DC22KV
DC24KV
DC26KV
DC28KV
DC50KV
Max output current
20mA
22mA
25mA
28mA
30mA
35mA
Response speed
≤1mS
≤1mS
≤1mS
≤1mS
≤1mS
≤1mS
Size
165mm*142mm*78mm
165mm*142mm*78mm
197mm*161mm*91mm
197mm*161mm*91mm
230mm*161mm*96mm
305mm*161mm*96mm
Cooling mode
Fan Cooling
Fan Cooling
Fan Cooling
Fan Cooling
Fan Cooling
Fan Cooling
Efficiency
90.00%
91.00%
91.00%
91.00%
91.00%
91.00%
Features & Details
【
HIGH EFFICIENCY
】-
This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response.
【
SIMPLE PORT CONTROL
】-
Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside.
【
LASER POWER ADJUSTMENT
】-
The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.
【
OPEN CIRCUIT PROTECTION
】-
The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube.
【
FACTORY AGING TEST
】-
Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds.
SHIPPING
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748
Texas
Warehouse
: 300 W Airtex Blvd, Suite 200, Houston, TX 77090
Kentucky
Warehouse
: 2125 Gateway Blvd, Hebron, KY 41048
New Jersey
Warehouse
: 1000 High Street, Perth Amboy, NJ 08861
ABOUT US
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
PAYMENT
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
RETURNS
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
CONTACT
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
WARRANTY
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
On Jul-08-21 at 16:29:05 PDT, seller added the following information: